Hmr Nmcadi + 10 Semi Autogenous Grinding Ball - Digital Mold - Ring grinding technology holdings (group) co., LTD

position：Home>PRODUCT>Digital Mold

Hmr Nmcadi + 10 Semi Autogenous Grinding Ball

【产品规格】Φ100-170mm

【产品密度】

【试用范围】Grinding ball for SAG mill

【产品介绍】The results of the combination of nano technology and CADI technology show that the matrix structure is compact and uniform. The perfect combination of surface hardness and toughness after hardening.

【产品特点】No stress concentration, no breakage, no out of round, no peeling during use Impact hardening, soft inside and hard outside, hardening layer by layer, one hard to the end The specific gravity is reduced by 10%, the mill power is saved by 10%, and the no

【化学成分】

【技术参数】

*The effective height difference of falling ball test is 10m, without breakage and roundness

Before falling ball test

After 40 000 drops

HMR NMCADI⁺¹⁰Case analysis of grinding ball

There are two series of grinding operations in a copper ore dressing plant in Mongolia, two semi autogenous mills with the same specifications, and the operation conditions are completely the same. Series 1 adopts Φ 125mm nmcadi + 10 grinding balls produced by HMR group, and series 2 adopts Φ 125mm forged grinding balls produced by other manufacturers.

Φ9000mm×3000mmSemi autogenous mill

After 1.6 months of operation, the statistical analysis results of grinding ball use effect are as follows:

The average ball consumption of HMR nmcadi + 10 grinding ball is 327 g / T, and that of other manufacturers is 786 g / T. the unit ball consumption is reduced by 58.4%.

HMR nmcadi + 10 grinding ball shows the perfect combination of hardness and toughness, work hardening in the process of use, low wear rate, low crushing rate and no loss of roundness.

HMR Φ125mm NMCADI⁺¹⁰Grinding ball